Version History
Here you can find the changelog of BLEvo - Transforms your Levo i since it was posted on our website on 2018-03-27.
The latest version is 3.12.6.602 and it was updated on soft112.com on 29 March, 2024.
See below the changes in each version:
version 3.12.6.602
posted on 2023-09-09
- Forced BluetoothDevice.TRANSPORT_LE connection
- Fixed voice message about stats in miles
- New handling of update the Key Code for Levociraptor
- Added email request for key code not handled by Levociraptor
version 3.12.5
posted on 2023-06-25
- Added audio message for enabling/disabling Crash detection
- Added audio message for high power (> 900 watts). This happens when you have problems with the second battery
- Updated Ant+ library to 3.9.0 for compatibility with Android 13
- Bugfix: Corrected altimetry graphic display with some particular GPX
- Various bugfixes
version 3.12.4.596
posted on 2023-04-05
- Improved calibration of Levociraptor crash sensor
- Improved Speed and Cadence Gauge graphics
version 3.11.3
posted on 2022-05-09
- Added test to write the folder / BLEvo to be sure to be able to write in this folder
- Added rights control for Android 12 in connect bluetooth to avoid crashes
- Optimized display of BLUE dot on the home screen
- Added the possibility to listen to the description of the waypoints
- Updated the download link for AndroMaps from V4 to V5
- Bugfix: automatic speed multiplier setting with Levociraptor
version 3.11.2
posted on 2022-02-18
- Now if .map file is executed with BLEvo, it is copied to the maps folder
- Added customizable file style for Andromaps (install files in /BLEvo/MAPS/theme/)
- Added voice message for maximum heart rate last km
- Added percentage of battery charge of the cardio
- Bufix: Now Andromaps maps correctly display images of points of interest
- Small bug fixes
version 3.11.0
posted on 2021-12-18
- Now for new installations (from Android 10 onwards) the files are in the /Android/data/com.dopa.android.blevo/files/BLEvo folder
- Added FIT file in backup
- Added compatibility with battery version 2.5.4
- Added partial backup
- Added audio message for high battery or engine temperature
- Optimized crash sensor calibration at tour start
- Bugfix calculating altitude with Levociraptor
- Bugfix stability connection with Levociraptor
version 3.10.0
posted on 2021-10-03
- Added current position in the GPX page
- Added support for firmware version x.24 for Levo 2018 and for new SL
- Added MisterMind management with Levociraptor Gen2
- Added Elevation gain sensitivity configuration
- Added button for quick recover of the speed restriction
- Bugfix: long audio messages were not queued (thanks to StefanoT for the issue notification)
- Bugfix: display wh secondary battery consumed in the tour list
version 3.9.6
posted on 2021-06-13
- Added maps with customizable links
- Fixed ascent calculation with DEM
- Fixed ride map visualisation with wrong data
version 3.9.5
posted on 2021-05-24
- Optimized bluetooth connection
- Now for the crash detection the bike must be stopped at least 2 seconds
- Now the FIT file is updated every second if the bike is in motion
- Crash sensor can now be calibrated at each ride start
- Bugfix: crash of the app on closing
- Bugfix: If bike without TCU, the data was not taken from the GPS if the bike was turned off
version 3.9.4
posted on 2021-05-11
- Added switch on and switch off screen button
- Bugfix: Automatic Bluetooth reconnection
- Bugfix: Dynamic leg power for Smart Power
version 3.9.3
posted on 2021-05-07
- Bugfix bluetooth connection
version 3.9.0
posted on 2021-04-28
- Added Levociraptor Gen2 support
- Correct management of DEMs with negative coordinates
- Map cache is now placed under BLEvo/MAPS/osmdroid
- Now you can create .mbtiles maps and put them under /BLEvo/MAPS/osmdroid
- Now the DEM files (.hgt) can be put on the sd in the path /sd/BLEvo/DEM
- Added field in the display for "Battery consumed"
- Added short voice message for heartbeat
version 3.8.7
posted on 2021-04-07
- Creation of FIT file to import in Garmin Connect
- Clarified the configuration of DEMs with automatically hidden fields
- Optimized Bluetooth connection (and automatic reconnection)
- Added deletion of associated bike (press and hold on the name of the bike)
- Faster responsiveness of the Smart Power
- Bugfix: secondary battery consumption calculation
- Bugfix: GPS altitude read incorrectly
version 3.8.0
posted on 2020-12-06
- CSV import (also from ios)
- Added DEM file management for altitude calculation
- Changed lock / unlock map icon
- Added voice message of battery status every 10%
- Action from remote control to turn the display on and off
- Bugfix: GPS and Bluetooth management when the tour is paused (now it stays on if there is automatic start)
- Bugfix: SL battery voltage calculation in CSV
- Bugfix: Calculation of battery consumed with SL
version 3.7.5
posted on 2020-10-16
- Added ⚡ on the phone battery if a power bank is connected
- Second Levo SL battery management added
version 3.7.3
posted on 2020-09-14
- Added cardio zones
- Now the first recognized bike is connected without having to go to configuration and re-scan
- Added configuration to enable / disable GPS ascent calculation correction
- Now the GPS ascent calculation correction can be configured for each single ride
- Bugfix: voice message on GPS ascent
- Bugfix: resizing bike monitor fields
- Bugfix: off-track signaling on GPX with widely spaced points
version 3.7.2
posted on 2020-08-21
- The assistance percentage now has the same background as the assistance level color
- Added background color for engine and battery temperature
- Added odometer field in the display fields
- Added elevation profile autozoom
- Added automatic addition of waypoints at the top of the climb
- Added display fields to know the km and time for then next waypoint
- Added voice message for high heart rate repeated every minute
version 3.7.0
posted on 2020-05-11
- Added compatibility with ANT+ cardio devices (the phone must support ANT+)
- Added audio message with motor temperature and battery temperature
- Inserted the version of BLEvo in the statistics even in the tours with bike not connected
- Reviewed english translation
- Bugfix: error message on Strava upload
- Bugfix: GPX import on special GPX
version 3.6.9
posted on 2020-03-22
- Added GPX extension in file renaming
- Bugfix: Crash on restoring screen on
version 3.6.8
posted on 2020-03-16
- Added ascent/descent/plain time
- Added ascent/descent speed
- Added button to upload Strava directly from the rides list
- Added phone vibration if GPS is not in coverage
- Bugfix: Crash when starting the tour
- Bugfix: avoid loss of display configuration if type is changed
- Bugfix: GPX copy
version 3.6.7
posted on 2020-02-04
- Added audio message to know when GPS is out of coverage and Bike is disconnected
- Added +/- buttons in the Smart Power configuration
- Review the constraints in the configuration of the Smart Power
- Now the Smart Power configuration must be saved otherwise the changes will be lost
- Added up to 6 possible smart Power configurations
- Now in the Smart Power configuration, if SP or SHR is not selected, the static configurations can be saved
- Review Strava authentication
version 3.6.6
posted on 2020-01-02
- Added audio message for expected time arrival (ETA)
- Bugfix: minimum configuration of Smart Power in turbo
- Bugfix: Crash new configuration mask on old Android
version 3.6.5
posted on 2019-12-30
- Reviewed the configuration interface for Smart Power
- Now with the configuration of the Smart Power it is also possible to select the reference assistance
- Added configuration parameter to be able to turn off and the screen if the phone battery is under 20%
- Now if only one assistance level has been used, only the total statistics will be shown
- The bike monitor configuration menu has been revised
- Now you can open the configuration from the tour list
version 3.6.4
posted on 2019-12-11
- Added configuration to ask at the end of the ride whether to rename the tour, copy the GPX and upload it to Strava
- Added configuration to choose whether to display the altitude in feet or meters
- Added link to Youtube page
- Now the TCX is saved every 3 meters and not every 6 as before
- Bugfix: if the bike was not moving, the map was not rotated correctly
- Bugfix: White background (BM displays still remain black)
- Bugfix: Arrow color
- Bugfix: Track size on new Android
version 3.6.3
posted on 2019-11-29
- Now the language configuration of the voice messages also configures the BLEvo language
- Added the ETA field (Estimate time arrival) and the field to know how many KMs are missing
- Added average speed calculation for up / down
- Now the Smart Power in non Expert has the leg power decreased in TRAIL and TURBO
- Bug fix: GPX import with particular name
- Bug fix: The bike monitor always restored the preset settings
version 3.6.2
posted on 2019-11-16
- Added compatibility for firmware 2.32.2 (2018)
- Added back and GPX button in the list of tours
- Fixed string kilometers in the list of tours
- Added translation in Polish (thanks to Maciej Jeziorski)
- Bugfix: display waypoints and arrow size on Android 9
- Bugfix: GPX import
- Bugfix: Rides index
version 3.6.1
posted on 2019-10-30
- Optimized save parameters in "Display customization"
- Add TCU version code as per Mission Control
- Revised automatic reconnection when data is not received
- Bug fix: map display with Google maps
version 3.6.0
posted on 2019-10-25
- Added data backup and restore management
- Added rides list
- Added the possibility of not keeping the screen active during the tour
- Added the possibility to have the map not centered
- Bugfix: Strava upload (now you can use also special characters)
version 3.5.6
posted on 2019-09-18
- Added folder management in GPX import
- Added help with the order of display customization fields
- Now the GPX are copied under the /BLEvo/GPX/MyRides folder (on request)
- Bugfix: Barometer calibration on start tour
- Bugfix: Upload Strava
version 3.5.5
posted on 2019-09-12
- Added GPX import checks
- The privacy field is no longer possible to use for uploading activities (Strava decision)
- Added the sound of the bell (and of General Lee) in the remote commands
- Added possibility to remove the WP of beginning and end path and to save the WP with the date and time without having to enter a text
- Added buttons to display / hide the elevation graph and buttons on the map
version 3.5.4
posted on 2019-08-22
- Added elevation graph in GPX management
- GPX files can now be imported from other apps (like Google Drive)
- Now you can rename, delete and add GPX files
- Added the possibility to choose the color of the GPX track and the track made
- Added initial scan of BLE devices
- Added compatibility with new Levo battery firmware 2019 2.4.4
- Bugfix: updates in the bike monitor of the values modified in the bike setup
version 3.5.3
posted on 2019-08-11
- Added the ability to move along the path of the imported GPX
- Bugfix: Displaying total KMs in miles or km
- Bugfix: voice message if km less than 1
- Bugfix: crash on bike setup opening
version 3.5.1
posted on 2019-06-20
- Added the Speed Multiplier parameter to be able to use the bike sensor with a speed reduction system
- Added filter for barometer altitude values
- Added configuration parameter to automatically calibrate the barometer with GPS when stopped
- Optimized slope calculation
- Improved battery consumption on map display
- Now the AM / PM time is displayed if set in the system
- Bugfix
version 2.12
posted on 2018-03-08
- Added the upload of the track on Strava (the saving of the TCX file must be activated)
- Now starting the Bike Monitor from the main menu, BLEvo tries to connect to the last connected bike
- Added the average consumption statistic at km